This kit comprises a main electronic control module, all of the necessary fitting accessories and the installation manual. The AP900C control unit has a built-in CAN Bus interface which will pick-up all of the necessary signals from the vehicle.
In addition to the AP900 kit, this system requires a vehicle-specific wiring harness. In order for the correct harness to be supplied, the following vehicle details are required:-
Make/model, year of manufacture, manual/automatic transmission and if the vehicle is petrol/diesel/hybrid.
To complete the system, select either the CM7, CM21 or CM35 control.
The following electrical connections must be made to the vehicle:-
Power (+12v Ignition), CAN HI & CAN LO
User Benefits
- Helps to reduce fuel consumption and exhaust emissions (lowering your carbon footprint).
- Allows you concentrate on the road and not your speedometer.
- Helps avoid unintended speeding.
- Allows you to set a maximum vehicle speed limit in safety camera enforcement areas.
- Reduces driver fatigue and enhances driver comfort.
- Simple operation.
Please click to see our compatibility guide.
The Cruise Control Functions / Features
Functions | Features |
ON/OFF | Disable Cruise Control, (Safety Override) |
SET | Set cruise control at present speed |
ACCEL | Accelerate vehicle and set to new speed |
TAP UP | Tap speed up by 0.6 mph ( 0.9 Km/h ) per tap |
DECEL | Decelerate vehicle and set to new speed |
TAP DOWNᅠᅠᅠᅠᅠᅠᅠᅠ | Tap speed down by 0.6 mph ( 0.9 Km/h ) per tap |
COAST | Disengage cruise control |
RESUME | Resume last set speed |
MEMORY | Press and hold button Memory I or II to program or select your desired speed |
The Speed Limiter Functions / Features
Functions | Features |
SET | Press the SET key to set the variable speed limiter at the current speed |
TAP UP | One tap up will increase the variable limit for 1 km/h |
STEP UP | Press and hold the SET key for over 2 seconds then release the SET key for step up, the variable limit speed will increasing in 10km/h step |
RES | Once the variable limit has been departed, user may press the RES key for resume to the previous limit settings |
TAPᅠDOWNᅠᅠᅠᅠ | One tap down will decrease the variable limit for 1 km/h |
STEP DOWN | Press and hold the RES key for over 2 seconds then release the RES key for step down, the variable limit speed will decreasing in 10km/h step |
COASTᅠSWITCH | To depart the variable speed limit , user may press the COAST key |
MEMORY | Press and hold button Memory I or II to program or select your desired speed |
Brand | Liteon |
---|---|
Product Features |