Viewing:
Homepage
Automotive Products
Accessories
Left Turn Warning Device Interface

Left Turn Warning Device Interface

£25.00£30.00Inc VAT

Description
Specification
Operation
Questions
Reviews

This product monitors the left hand and right hand indicators on a vehicle and generates individual outputs that will be active all of the time that the indicators are flashing. A typical application for this product is for controlling a Left Turn warning device such as a siren or talking alarm. There is an option for speed dependant operation wherby the outputs are only active when below a certain speed. This speed threshold may be selected via DIP switches. Hence a Turning Left Alarm will only operate below the pre-set speed. Note that this feature requires a connection to a vehicle road speed signal.

  • Supply range:  8v - 30v
  • Output current: 5 amps Max
  • Idle supply current:: 10.0mA Max
  • Size: 70mm x 44mm x 16mm
  • LH and RH outputs
  • Option for speed controlled outputs
  • Adjustable speed setting via DIP switch
  • Speed pulse input
  • Status LED

The module may be operated in two modes. If speed dependant operation is selected, the outputs will only become active when the indicators are on and the speed signal is less than the speed selected on the DIP switches.  If speed dependant operation is not selected, the outputs will be active with respect to the state of the indicators only. This mode is selected by setting all 3 DIP switches to the Off position.

If both left hand and right hand indicators are on (i.e. the Hazards are on), both outputs will be off.

0 stars (0 review)

Share your thoughts with other customers… write your own review

Nobody has asked a question about this product yet

Ask a question about this product