Welcome to the FastTXT pages of the Speed Genie in-car speed alarm website. These pages are designed especially for visually impaired and partially sighted internet users. Enter main website to view our products and services.

How do I operate SpeedGenie? As with all good products, operation could not be easier! The sequence is as follows:-

Setting the System

• Step 1 Drive at the speed you wish to be limited to.
• Step 2 Press the switch to activate the system. The switch will light to indicate that the system is on.
• Step 3 If the selected speed is exceeded, the system will beep and the switch light will flash.
• Step 4 To set a new limit, just press the switch again when you are at your required speed.

De-activating the system

• Step 1 Press and hold the switch down for 2 seconds. The switch light will go out.
• Step 2 The SpeedGenie is now de-activated until you require it again.

Avoid speeding fines! SpeedGenie system measures the speed at which your vehicle is being driven. When you press the switch, the system remembers your current road speed, notifies you, and uses this as your own personal speed limit.

©sitemakers website design