Welcome to the FastTXT pages of the Speed Genie in-car speed alarm website. These pages are designed especially for visually impaired and partially sighted internet users. Enter main website to view our products and services.

How does SpeedGenie Work? When activated, the SpeedGenie system measures the speed at which your vehicle is being driven. When you press the switch, the system remembers your current road speed and uses this as your own personal speed limit. When you drive at a speed 10% higher than this set limit, the system will 'beep' at you to warn you. All the time you are above your set limit, the system will give 3 beeps every 4 seconds. When you drop below the set limit, the system stops beeping. When the system is beeping, it also flashes the light built into the operating switch.

As an example, if you press the switch at 40 mph, the system will alert you when your speed reaches 44 mph and will stay active all the time you are above this speed. When your speed drops below 44 mph again, the system stops beeping.

Each time you press the switch, your current road speed is used as the limit. As you enter different speed limits, you just adjust your road speed accordingly and then press the switch to set your new limit.

Avoid speeding fines! SpeedGenie system measures the speed at which your vehicle is being driven. When you press the switch, the system remembers your current road speed, notifies you, and uses this as your own personal speed limit.

©sitemakers website design