Parking Interface

CANM8-PARK

The CANM8-PARK Interface provides outputs to allow intelligent control of front parking systems when fitted to CAN Bus controlled vehicles. A speed dependent output will provide power to the parking system only when the vehicle speed is within certain limits.

A further output may be used (if the vehicle supports this feature) to only allow front parking systems to be powered when the vehicle is not in reverse.

Additional outputs are provided when the vehicle CAN Bus supports this data.

Specification:-

12 volt Speed Dependent Output (active from 0.1 to 6 mph)

Other Outputs:- Speed Signal, Illumination, Hand Brake Applied.

Additional Features:- Auto-detection of CAN Bus Polarity, Sleep Mode.