 |
|
LaserlineIf you have a 2-button control, we need to know the model of your alarm system and also the model number of your key. The model number of your key can be found embossed on the reverse side of the green printed circuit board inside of your key case. It will always start with a 'T', followed by a numeric code i.e. T101-V2 or T96. We may also require other details from the key, so it is useful to have it with you if you call us with further enquiries. If you have a 3-button control, we do not need this information. ----------------------------------------------- Laserline 3 Button - T108 Used with: 288, 289, 290i2 ----------------------------------------------- Laserline 2 Button - T101-V2, T101-V1, T101-18 and T101-V3 Used with: 996, 989, 988, 930, 929, 919, 918, 860, 288, 289, 290i2 Please note that with T101-V1 and T101-18 versions, we will need the number on the silver disk component that looks like a watch battery. With the T101-V3, please have your control open when you call us. ------------------------------------------------ Laserline 2 Button - T96, T97 Used with: 986, 984, 979, 968, 948, 944, 939, 937, 936, 924, 919, 911, 908, 850 Please note that we need the 6-digit code - marked on a label inside of the control. Also, on T96 versions, we will need the number on the silver disk component that looks like a watch battery. ----------------------------------------------- Laserline Touch Key Used with: Most Laserline immobilsers and some alarms as an emergency override. The touch key does not need to be opened as there is no 'T' code associated with them. ------------------------------------------------ |
|
|||||
|
||||||
 |
|
